nominal catalog 5 11.64mm 1500 PSI sand blasting hose specifications

Thermoid Industrial Hose - Hose Warehouse

Thermoid Industrial Hose Current Catalog: HBD/Thermoid, Inc. has been the recognized industry leader in spiral hose technology and rubber production innovations for over 30 years.

read More>>

Grouting Hose - ThomasNet

Specifications include 1 1/4 in. to 4 in. nominal ID, 1.57 in. to 5.12 in. nominal OD, 600 psi to 800 psi working pressure & -40 degrees F to +176 degrees F temperature range. Hoses are available with black, conductive SBR/NR blend covers & high tensile textile cords.

read More>>

PRODUCT DATA SHEET: EPOXOLINE - SERIES 22

PRODUCT DATA SHEET SERIES 22 PRODUCT PROFILE longer than maximum recoat requires scarification by abrasive blasting prior to topcoating. SURFACE PREPARATION STEEL Non-Immersion Service: SSPC-SP6/NACE 3 Commercial Blast Cleaning with a minimum angular anchor profile of 1.5 Material Hose ID (Nominal 200 feet): Attach up to 200’ x ½

read More>>

Water Jetting | Products & Suppliers | Engineering360

Description: Novaflex 2200. Rubber Water Jetting Hose. Designed for extremely flexible, lightweight high pressure Blast / Jet Pressure: 1500 psi; Machine Mounting: Portable Machine; Materials Cleaned: Metal sand and ice. Its 3000 psi, 5.5 gpm triplex pump has the thrust to pull the hose down long runs, the pressure to cut through tough

read More>>

Dixon Specialty Products - Industrial Hose Coupling …

Nominal Fittings and Hose Insertion Tool This catalog is intended as a product offering. It is not intended to be a user or technical manual. Check for: Abrasive materials, chemical compatibility, etc. P. ressure: What is the maximum pressure including surges (or, maximum vacuum) that this hose assembly will be subjected to? Always rate

read More>>

INDUSTRIAL WASH EQUIPMENT CATALOG - PDF

INDUSTRIAL WASH EQUIPMENT CATALOG Viking manufactures a full line of jet spray washers, from small tumble belt and basket washers to rotary table units all …

read More>>

OERTZEN High pressure cleaners - von Oertzen GmbH

Drain cleaning set Mini comprising of drain cleaning hose, nominal diameter 5, length 7 m / 23 in, with ball valve, maximum 200 bar / 2900 psi, mini rocket-drill nozzle 4 x 0.8 mm 1500 bar / 21750 psi, 1700 bar / 24650 psi with joint, for OERTZEN cold water hp aggregates E 1500/E 1700 PVC hose. Suction hose for sand blasting agent made

read More>>

Hydraulic Hoses | Northern Tool + Equipment

Shop 57 Hydraulic Hoses products at Northern Tool + Equipment

read More>>

Industrial & Specialty Hose Products - Eagle Brand Master

Industrial & Specialty Hose Products - Eagle Brand Master Catalog 1. INDUSTRIAL&SPECIALTYHOSEPRODUCTS Eagle Brand Master Catalog

read More>>

Jackson Industries Fluoropolymer Hose Catalog | Sodium

Jackson Industries Fluoropolymer Hose Catalog - Free download as PDF File (.pdf), Text File (.txt) or read online for free.

read More>>

Air Compressor

source and to provide initial technical guidance for selecting the right air compressor for specific applications. The central focus is on packaged complete unit air compressors, most commonly used in to 150 psi, use flow-through lubrication that “consumes”

read More>>

Graco Reactor A-25 Plural-Component Sprayer

Abrasive Blasting; Automated Fluid Dispensing; Automatic Lubrication; Automotive Finishing - Painting Reactor A-25 Air-Driven Foam Proportioner For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute Where to Buy Request Info. Air consumption with 02 tip at 1500 psi stall pressure: 28 scfm. 0.8m³/min. Machine Maximum

read More>>

Diving cylinder - Wikipedia

The blast caused by a sudden release of the gas pressure inside a diving cylinder makes them very dangerous if mismanaged. Tumbling with abrasive media may be needed for heavy contamination, particularly of heavy corrosion products. (210 bar) cylinder containing less than 1,500 pounds per square inch (100 bar) may lose sufficient

read More>>

499 Concrete – General - Ohio Department of Transportation

Therefore, 12.38 pounds (5.6 kg) of sand and 15.31 pounds (6.9 kg) of stone are used to determining the correction factor. 2. Fill the air pot 1/3 full of water.

read More>>